Hey guys, For a number of weeks, I have been trying to get my JR programmer V2 show up, and when it does, work with JR programmer. I got it working on my first try, where it just worked when I plugged in the Nand cables and I found out what I thought was a OPUS turned out to be a XENON. Jr Programmer Cupertino 3. Try a driver checking tool such as DriverIdentifier Software. As there are many drivers having the same name, we suggest you to try the Driver Tool, otherwise you can try one by on the list of available driver below. Jr Programmer V2 Firmware Please scroll down to find a latest utilities and drivers for your XECUTER.
- Jr Programmer V2 Drivers Windows 10
- Jr Programmer V2 Drivers
- Jr Programmer Driver
- Jr Programmer Drivers Windows 10
- Jr Programmer V2 Driver Download
- Jr Programmer Drivers
- Drivers Jr Programmer V2 Driver License
There are a few variants of the USBAsp, mostly they work the same and need the same drivers.
![Programmer Programmer](/uploads/1/1/7/9/117929754/313227788.jpg)
Jr Programmer V2 Drivers Windows 10
This guide is for the ones that look like this, but as I say mostly they work the same so try it anyway.
Linux Drivers
Jr Programmer V2 Drivers
Your system should already have the necessary driver, but might need a tweak to allow non-root users to access the USBasp
Create a text file /etc/udev/rules.d/99-USBAsp.rules and inside that file put the following single line
SUBSYSTEM'usb', ATTR{product}'USBasp', ATTR{idProduct}'05dc', ATTRS{idVendor}'16c0', MODE='0666'
this is tested on my Ubuntu systems, your milage may vary, you probably need to restart udev (/etc/init.d/udev restart), or just reboot.
Google is your friend.
Mac Drivers
Nope, I don’t think you need any, it will probably “just work”.
Windows Drivers
Windows is of course the bothersome child, but it’s not too hard once you know how.
You need to install “libusb”, the simplest way to install is to use the “Zadig” software, first download it…
![Download Download](/uploads/1/1/7/9/117929754/244376205.jpg)
Now connect your USBAsp and run the Zadig program. In the Zadig window a drop-down shows all the found devices which it might be able to help with and hopefully USBasp is in there.
If it’s now shown in the drop down, try selecting “List All Devices” from the Options menu
Jr Programmer Driver
now in the area on the right side of the arrow, you will see some little up and down arrows, this selects the driver to install for that device, on the left of the green arrow is the driver already installed for that device if any. You probably want to select “libusbK” if it is available on the right of that green arrow.
But you can always run zadig again and try a different driver if you have no luck the first time.
The Zadig website is here, Zadig is GPL open source software.
Jr Programmer Drivers Windows 10
Troubleshooting Windows
If you get a message like “could not find USB device with vid=0x16c0 pid=0x5dc”
This probably indicates that zadig (or you) selected the wrong driver, re-run zadig and try a different one, typically at least for a 64bit system, libusbK is what you want.
If the zadig install times-out and says it failed to install
Don’t worry just reboot (you might not be able to quit Zadig, doesn’t matter, just reboot), it probably worked anyway. Try again if not.
Jr Programmer V2 Driver Download
If you don’t see USBasp in the devices list in Zadig
Jr Programmer Drivers
Remember to plug in your USBasp before starting Zadig, and select Options > List All Devices in zadig’s window in case it think’s it’s already installed.